IOT-PROJECT-USING-ESP32_-Smart-Home-Automation-Solution-Project-
\(\color{red} \space ESP32 \space Based \space Smart \space Home \space Automation \space Solution \space IoT \space Project\)
IOT-PROJECT-USING-ESP32_-Smart-Home-Automation-Solution-Project
\(\color{orange} \space Hardware \space Requirements \space and \space Description\)
| \(\color{green}Components\) | \(\color{red}Description\) | \(\color{red}Image\) |
|---|---|---|
| esp32 | ESP32 is low cost and low power on chip microcontroller which is developed by Espress-if , it haswireless Bluetooth and wi-fi capabilities. |
| 1 channel relay module | A 5V relay module is an electronicdevice that acts as a switch, allowing low-voltage control signals to control high-voltage circuits. | |
| Dht 11(1) | Dht 11 is a low cost sensor that sensestemperature and humidity from environment and sends thesignal to micro controller.to measure surrounding air sensoruses thermistor and capacitive humidity sensor. |
| MQ 5 (Gas sensor) | The Grove - Gas Sensor(MQ5) module is useful for gas leakagedetection (in home and industry). |
| IR Sensor | The IR transmitter continuously emits the IR light andthe IR receiver keeps on checking for the reflected light. |
| Buzzer |
| Jumper wires |
| Powersupply |
| Complier : Thonny Python |
MODES To Monitoring
| \(\color{green}BlynkApp\) | \(\color{red}ThinkSpeak\) | \(\color{red}Switch\) | | — | — | — |
- Blynk App COntrol By Phone and Computer/Laptop(Cloud storage)
- ThinkSpeak Also
code👇👇👇👇:
https://drive.google.com/file/d/1yq1LSxjtn2pypA1C1PO5RAgsa96rBgbY/view?usp=sharing
Report Documentation👇👇👇👇:
https://drive.google.com/file/d/1VdVypHyeQjQyCTAfFOrmWCSanWREPOIP/view?usp=sharing
fritzing🔑🔑🔑🔑:
app🙋♂️🙋♂️🙋♂️:
This app makes you control your Smart Vacuum Cleaner Robotic Car projects like move FordWard, BackWard , Left and Right , and Speed also using your mobile phone Blynk and ThinkSpeak WIFI.
All the files (apk, circuit, program, codes) are all provided) :)
Check the provided Schematic Fritzing for connections.
Labels(D0, D1, D2, D3, D4) can be Rename. i.e Forward, Backward, Left, Right, and Speed .
Type your Router SSID and Password
a. Upload and open the serial monitor and copy the ESP2866 IP address to the app.
#
HC-SR04 Ultrasonic sensor Connection to Nodemcu:-
Servo Motor Connection to Nodemcu:-
Team Members
| Manjeet Kumar | Dilpreet Kaur | Simran |
|---|---|---|
Contact
Have an project? DM me at 👇
Drop a mail to: manjeetkyp24@gmail.com
Follow My Linkedin
https://www.linkedin.com/in/manjeetdeveloper2022/
Donation
If this project help you reduce time to develop, you can give me a cup of coffee :)
https://paypal.me/ManjeetKumarBihar?country.x=IN&locale.x=en_GB